Before starting up the new diesel generator, we should pay attention to filling the oil through the refueling port.When the diesel generator is being refilled, the engine should be in a horizontal position, and, on the other hand, we should pay attention to a change in the oil level itself.
When the diesel generator is finished filling up, it should wait a little while to see the oil level on the oil gauge.For each oil filter, that is to pay attention to the need to be filled with cleaning oil, next, can be installed on the engine.
When selecting oil for diesel generators, first of all, we should pay attention to choosing a suitable oil viscosity. Next, we should pay attention to matching the grade of performance of American petroleum institute (AH).As far as the performance grade of engine oil is concerned, it will directly represent the level of oil additive itself to a certain extent. As far as the heavy load engine is concerned, it plays a protective role, namely, the additive in engine oil.
Because the additives will be consumed over time, only if we choose a sufficient level of oil can the engine be guaranteed to be very reliable during the entire oil change cycle.In addition, we should pay attention to the fact that in terms of oil consumption, it can be divided into normal consumption and abnormal consumption.
And finally, in terms of the normal consumption of the diesel generator oil, to a large extent because there is a gap between the piston and the cylinder wall, some of the oil, which is going up and down with the piston, is brought into the combustion chamber and burned with the mixture.That would be normal consumption on diesel generators.http://www.wandiengine.com/